Yamaha 40hp Precision Blend vs Evinrude 40hp (4-Stroke)
40hp Precision Blend
40hp (4-Stroke)
| Spec | Yamaha 40hp Precision Blend | Evinrude 40hp (4-Stroke) |
|---|---|---|
| Power & Performance | ||
| Horsepower | 40 HP | 40 HP |
| Displacement | 698 cc | 815 cc ← |
| Configuration | 3 Cyl / Inline-3 | 3 Cyl / Inline |
| Weights & Dimensions | ||
| Dry Weight | 84 kg (185 lbs) ← | 109 kg (240 lbs) |
| Mechanical & Electrical | ||
| Gear Ratio | 1.85 | 2.27:1 |
| Alternator | 120 W | 216 W ← |
| Fuel Delivery | Carbureted (Oil Injected) | EFI |
| Maintenance | ||
| Spark Plug | NGK BR8HS-10 | NGK DCPR7E |
| Engine Oil | Yamalube 2M | 10W-40 FC-W |
Technical Comparison Analysis
Power & Displacement
Comparing the Yamaha 40hp Precision Blend and Evinrude 40hp (4-Stroke) shows a displacement difference of 117cc. The Evinrude features a larger 815cc block, which typically provides superior low-end torque and better hole-shot performance when pushing heavy loads or reaching planning speeds.
Weight & Rigging
In terms of transom weight, the Yamaha is the lighter option at 84kg, offering a weight saving of 25kg over its competitor. This weight reduction is critical for smaller hulls or boats with limited transom capacity where every kilogram affects the center of gravity and drainage efficiency.
Electrical & Features
For boats equipped with modern electronics, sonar, and shallow-water anchors, the Evinrude offers the best charging performance with a 216W alternator. Choosing the right power-to-weight profile between these two 2-stroke engines depends heavily on your specific boat's displacement and daily power requirements.