General Specifications
HP / kW
250 HP / 186.3 kW
Displacement
3400 cc (207.5 cu in.)
Cylinders
6 (V6 74°)
WOT RPM
5400 - 6000
Weight
253 kg / 558 lbs
Drive & Lower Unit
Gear Ratio
1.85
Shaft Length
20" Long, 25" X-Long, 30" XX-Long
Electrical System
Alternator Output 1915 Watts
Starting System Electric (Digital)
Technical Maintenance Toolkit
Verified service specifications for the Evinrude 250hp E-TEC G2 (2019)
Lubrication
Engine Oil
Evinrude XD100 Only
Gearcase Lube 1350 ml
Ignition System
Spark Plug
Champion QC10WEPI
Firing Order 1-2-3-4
Performance Specs
Idle RPM 700 ± 50
WOT Range 5400-6000
Alternator 1915W
Standard Maintenance Intervals
20H Break-in Service
100H Annual Tune-up
300H Water Pump & Seals
Identification
The serial number for the Evinrude 250hp E-TEC G2 is typically found on a plate located on the transom bracket.
Technical Toolkit
Maintenance Compatibility
These models share common service parts with the Evinrude 250hp E-TEC G2:
Model Evolution
History of the Evinrude 250HP series over the years:
Category Discovery
Reference Data
Information compiled from Evinrude Marine factory service manuals and original sales literature published in 2019.