Suzuki DF60A Lean Burn vs Chrysler 55hp (2-Stroke)
DF60A Lean Burn
55hp (2-Stroke)
| Spec | Suzuki DF60A Lean Burn | Chrysler 55hp (2-Stroke) |
|---|---|---|
| Power & Performance | ||
| Horsepower | 60 HP | 55 HP |
| Displacement | 941 cc ← | 732 cc |
| Configuration | 3 Cyl / Inline | 2 Cyl / Inline |
| Weights & Dimensions | ||
| Dry Weight | 104 kg (229 lbs) | 71 kg (157 lbs) ← |
| Mechanical & Electrical | ||
| Gear Ratio | 2.27:1 | 2.00:1 |
| Alternator | 228 W ← | 60 W |
| Fuel Delivery | Sequential EFI | Carbureted |
| Maintenance | ||
| Spark Plug | NGK DCPR7E | Champion L77JC4 |
| Engine Oil | Suzuki Marine 4-Stroke | TC-W3 2-Stroke |
Technical Comparison Analysis
Power & Displacement
Comparing the Suzuki DF60A Lean Burn and Chrysler 55hp (2-Stroke) shows a displacement difference of 209cc. The Suzuki features a larger 941cc block, which typically provides superior low-end torque and better hole-shot performance when pushing heavy loads or reaching planning speeds.
Weight & Rigging
In terms of transom weight, the Chrysler is the lighter option at 71kg, offering a weight saving of 33kg over its competitor. This weight reduction is critical for smaller hulls or boats with limited transom capacity where every kilogram affects the center of gravity and drainage efficiency.
Electrical & Features
For boats equipped with modern electronics, sonar, and shallow-water anchors, the Suzuki offers the best charging performance with a 228W alternator. Choosing the right power-to-weight profile between these two 4-stroke engines depends heavily on your specific boat's displacement and daily power requirements.