Suzuki DF140A (Lean Burn) vs Evinrude 130hp E-TEC (G1)
DF140A (Lean Burn)
130hp E-TEC (G1)
| Spec | Suzuki DF140A (Lean Burn) | Evinrude 130hp E-TEC (G1) |
|---|---|---|
| Power & Performance | ||
| Horsepower | 140 HP | 130 HP |
| Displacement | 2044 cc ← | 1727 cc |
| Configuration | 4 Cyl / Inline | 4 Cyl / V4 60° |
| Weights & Dimensions | ||
| Dry Weight | 179 kg (395 lbs) | 177 kg (390 lbs) ← |
| Mechanical & Electrical | ||
| Gear Ratio | 2.59:1 | 2.0 |
| Alternator | 576 W | 1915 W ← |
| Fuel Delivery | Sequential EFI | E-TEC Direct Injection |
| Maintenance | ||
| Spark Plug | NGK BKR6E | Champion QC10WEP |
| Engine Oil | Suzuki 10W-40 | Evinrude XD100 / XD50 |
Technical Comparison Analysis
Power & Displacement
Comparing the Suzuki DF140A (Lean Burn) and Evinrude 130hp E-TEC (G1) shows a displacement difference of 317cc. The Suzuki features a larger 2044cc block, which typically provides superior low-end torque and better hole-shot performance when pushing heavy loads or reaching planning speeds.
Weight & Rigging
In terms of transom weight, the Evinrude is the lighter option at 177kg, offering a weight saving of 2kg over its competitor. This weight reduction is critical for smaller hulls or boats with limited transom capacity where every kilogram affects the center of gravity and drainage efficiency.
Electrical & Features
For boats equipped with modern electronics, sonar, and shallow-water anchors, the Evinrude offers the best charging performance with a 1915W alternator. Choosing the right power-to-weight profile between these two 4-stroke engines depends heavily on your specific boat's displacement and daily power requirements.