Scott-Atwater 10hp Bail-a-Matic vs Mercury 9.8hp (2-Stroke)
10hp Bail-a-Matic
9.8hp (2-Stroke)
| Spec | Scott-Atwater 10hp Bail-a-Matic | Mercury 9.8hp (2-Stroke) |
|---|---|---|
| Power & Performance | ||
| Horsepower | 10 HP | 9.8 HP |
| Displacement | 269 cc ← | 179 cc |
| Configuration | 2 Cyl / Inline-2 | 2 Cyl / Inline |
| Weights & Dimensions | ||
| Dry Weight | 29 kg (64 lbs) | 24 kg (53 lbs) ← |
| Mechanical & Electrical | ||
| Gear Ratio | 1.60:1 | 2.0 |
| Alternator | 0 W | 60 W |
| Fuel Delivery | Carbureted | Carbureted |
| Maintenance | ||
| Spark Plug | Champion J6C | NGK B8HS |
| Engine Oil | SAE 30 or TC-W3 | TC-W3 2-Stroke |
Technical Comparison Analysis
Power & Displacement
Comparing the Scott-Atwater 10hp Bail-a-Matic and Mercury 9.8hp (2-Stroke) shows a displacement difference of 90cc. The Scott-Atwater features a larger 269cc block, which typically provides superior low-end torque and better hole-shot performance when pushing heavy loads or reaching planning speeds.
Weight & Rigging
In terms of transom weight, the Mercury is the lighter option at 24kg, offering a weight saving of 5kg over its competitor. This weight reduction is critical for smaller hulls or boats with limited transom capacity where every kilogram affects the center of gravity and drainage efficiency.
Electrical & Features
For boats equipped with modern electronics, sonar, and shallow-water anchors, the Mercury offers the best charging performance with a 60W alternator. Choosing the right power-to-weight profile between these two 2-stroke engines depends heavily on your specific boat's displacement and daily power requirements.