Parsun 60hp (EFI) vs Johnson 55hp (2-Stroke)
60hp (EFI)
55hp (2-Stroke)
| Spec | Parsun 60hp (EFI) | Johnson 55hp (2-Stroke) |
|---|---|---|
| Power & Performance | ||
| Horsepower | 60 HP | 55 HP |
| Displacement | 996 cc ← | 737 cc |
| Configuration | 4 Cyl / Inline | 2 Cyl / Inline |
| Weights & Dimensions | ||
| Dry Weight | 113 kg (249 lbs) | 85 kg (187 lbs) ← |
| Mechanical & Electrical | ||
| Gear Ratio | 1.85:1 | 2.42 |
| Alternator | 216 W ← | 84 W |
| Fuel Delivery | EFI | Carbureted |
| Maintenance | ||
| Spark Plug | NGK DPR7EA-9 | Champion QL77JC4 |
| Engine Oil | 10W-30 FC-W | TC-W3 2-Stroke |
Technical Comparison Analysis
Power & Displacement
Comparing the Parsun 60hp (EFI) and Johnson 55hp (2-Stroke) shows a displacement difference of 259cc. The Parsun features a larger 996cc block, which typically provides superior low-end torque and better hole-shot performance when pushing heavy loads or reaching planning speeds.
Weight & Rigging
In terms of transom weight, the Johnson is the lighter option at 85kg, offering a weight saving of 28kg over its competitor. This weight reduction is critical for smaller hulls or boats with limited transom capacity where every kilogram affects the center of gravity and drainage efficiency.
Electrical & Features
For boats equipped with modern electronics, sonar, and shallow-water anchors, the Parsun offers the best charging performance with a 216W alternator. Choosing the right power-to-weight profile between these two 4-stroke engines depends heavily on your specific boat's displacement and daily power requirements.