Mercury V12 600hp Verado vs Ilmor MV8 570 (Naturally Aspirated)
V12 600hp Verado
MV8 570 (Naturally Aspirated)
| Spec | Mercury V12 600hp Verado | Ilmor MV8 570 (Naturally Aspirated) |
|---|---|---|
| Power & Performance | ||
| Horsepower | 600 HP | 570 HP |
| Displacement | 7600 cc ← | 7400 cc |
| Configuration | 12 Cyl / V12 64° | 8 Cyl / V8 (90°) |
| Weights & Dimensions | ||
| Dry Weight | 572 kg (1261 lbs) | 376 kg (829 lbs) ← |
| Mechanical & Electrical | ||
| Gear Ratio | 2.50:1 | 1.5 |
| Alternator | 1890 W ← | 1197 W |
| Fuel Delivery | EFI | EFI |
| Maintenance | ||
| Spark Plug | NGK LMAR8C-9 | ACDelco 41-110 |
| Engine Oil | 25W-40 FC-W | 15W-50 Synthetic |
Technical Comparison Analysis
Power & Displacement
Comparing the Mercury V12 600hp Verado and Ilmor MV8 570 (Naturally Aspirated) shows a displacement difference of 200cc. The Mercury features a larger 7600cc block, which typically provides superior low-end torque and better hole-shot performance when pushing heavy loads or reaching planning speeds.
Weight & Rigging
In terms of transom weight, the Ilmor is the lighter option at 376kg, offering a weight saving of 196kg over its competitor. This weight reduction is critical for smaller hulls or boats with limited transom capacity where every kilogram affects the center of gravity and drainage efficiency.
Electrical & Features
For boats equipped with modern electronics, sonar, and shallow-water anchors, the Mercury offers the best charging performance with a 1890W alternator. Choosing the right power-to-weight profile between these two 4-stroke engines depends heavily on your specific boat's displacement and daily power requirements.