Mercury 275hp Verado (L6) vs Honda BF250 V6
275hp Verado (L6)
BF250 V6
| Spec | Mercury 275hp Verado (L6) | Honda BF250 V6 |
|---|---|---|
| Power & Performance | ||
| Horsepower | 275 HP | 250 HP |
| Displacement | 2598 cc | 3583 cc ← |
| Configuration | 6 Cyl / Inline 6 Supercharged | 6 Cyl / V6 60° |
| Weights & Dimensions | ||
| Dry Weight | 288 kg (635 lbs) | 270 kg (595 lbs) ← |
| Mechanical & Electrical | ||
| Gear Ratio | 1.85:1 | 2.00:1 |
| Alternator | 1008 W | 1296 W ← |
| Fuel Delivery | EFI + Supercharger | PGM-FI |
| Maintenance | ||
| Spark Plug | NGK ILFR6G-E | NGK IZFR6F11 |
| Engine Oil | Mercury 25W-40 Synthetic | 10W-30 FC-W |
Technical Comparison Analysis
Power & Displacement
Comparing the Mercury 275hp Verado (L6) and Honda BF250 V6 shows a displacement difference of 985cc. The Honda features a larger 3583cc block, which typically provides superior low-end torque and better hole-shot performance when pushing heavy loads or reaching planning speeds.
Weight & Rigging
In terms of transom weight, the Honda is the lighter option at 270kg, offering a weight saving of 18kg over its competitor. This weight reduction is critical for smaller hulls or boats with limited transom capacity where every kilogram affects the center of gravity and drainage efficiency.
Electrical & Features
For boats equipped with modern electronics, sonar, and shallow-water anchors, the Honda offers the best charging performance with a 1296W alternator. Choosing the right power-to-weight profile between these two 4-stroke engines depends heavily on your specific boat's displacement and daily power requirements.