Mercury 250 Pro XS V8 vs Honda BF225 V6
250 Pro XS V8
BF225 V6
| Spec | Mercury 250 Pro XS V8 | Honda BF225 V6 |
|---|---|---|
| Power & Performance | ||
| Horsepower | 250 HP | 225 HP |
| Displacement | 4600 cc ← | 3471 cc |
| Configuration | 8 Cyl / V8 64° | 6 Cyl / V6 60° |
| Weights & Dimensions | ||
| Dry Weight | 229 kg (505 lbs) ← | 270 kg (595 lbs) |
| Mechanical & Electrical | ||
| Gear Ratio | 1.75:1 | 1.87:1 |
| Alternator | 1071 W | 1296 W ← |
| Fuel Delivery | EFI | PGM-FI |
| Maintenance | ||
| Spark Plug | NGK LMAR6C-9 | NGK IZFR6K-11 |
| Engine Oil | 25W-40 FC-W | Honda 10W-30 |
Technical Comparison Analysis
Power & Displacement
Comparing the Mercury 250 Pro XS V8 and Honda BF225 V6 shows a displacement difference of 1129cc. The Mercury features a larger 4600cc block, which typically provides superior low-end torque and better hole-shot performance when pushing heavy loads or reaching planning speeds.
Weight & Rigging
In terms of transom weight, the Mercury is the lighter option at 229kg, offering a weight saving of 41kg over its competitor. This weight reduction is critical for smaller hulls or boats with limited transom capacity where every kilogram affects the center of gravity and drainage efficiency.
Electrical & Features
For boats equipped with modern electronics, sonar, and shallow-water anchors, the Honda offers the best charging performance with a 1296W alternator. Choosing the right power-to-weight profile between these two 4-stroke engines depends heavily on your specific boat's displacement and daily power requirements.