Mercury 125hp (Inline-6 Tower of Power) vs Johnson 115hp Crossflow V4
125hp (Inline-6 Tower of Power)
115hp Crossflow V4
| Spec | Mercury 125hp (Inline-6 Tower of Power) | Johnson 115hp Crossflow V4 |
|---|---|---|
| Power & Performance | ||
| Horsepower | 125 HP | 115 HP |
| Displacement | 1635 cc ← | 1632 cc |
| Configuration | 6 Cyl / Inline | 4 Cyl / V4 90° |
| Weights & Dimensions | ||
| Dry Weight | 135 kg (298 lbs) ← | 138 kg (304 lbs) |
| Mechanical & Electrical | ||
| Gear Ratio | 2.0 | 2.00:1 |
| Alternator | 201 W ← | 144 W |
| Fuel Delivery | Carbureted | Twin Carbureted |
| Maintenance | ||
| Spark Plug | NGK BUHW | Champion QL77JC4 |
| Engine Oil | TC-W3 2-Stroke | TC-W3 2-Stroke |
Technical Comparison Analysis
Power & Displacement
Comparing the Mercury 125hp (Inline-6 Tower of Power) and Johnson 115hp Crossflow V4 shows a displacement difference of 3cc. The Mercury features a larger 1635cc block, which typically provides superior low-end torque and better hole-shot performance when pushing heavy loads or reaching planning speeds.
Weight & Rigging
In terms of transom weight, the Mercury is the lighter option at 135kg, offering a weight saving of 3kg over its competitor. This weight reduction is critical for smaller hulls or boats with limited transom capacity where every kilogram affects the center of gravity and drainage efficiency.
Electrical & Features
For boats equipped with modern electronics, sonar, and shallow-water anchors, the Mercury offers the best charging performance with a 201W alternator. Choosing the right power-to-weight profile between these two 2-stroke engines depends heavily on your specific boat's displacement and daily power requirements.