Mariner 4hp International (Yamaha-built 6E0) vs Evinrude 4hp Twin (2-Stroke)
4hp International (Yamaha-built 6E0)
4hp Twin (2-Stroke)
| Spec | Mariner 4hp International (Yamaha-built 6E0) | Evinrude 4hp Twin (2-Stroke) |
|---|---|---|
| Power & Performance | ||
| Horsepower | 4 HP | 4 HP |
| Displacement | 83 cc | 87 cc ← |
| Configuration | 1 Cyl / Inline | 2 Cyl / Inline |
| Weights & Dimensions | ||
| Dry Weight | 20 kg (44 lbs) | 15 kg (33 lbs) ← |
| Mechanical & Electrical | ||
| Gear Ratio | 2.08 | 1.65 |
| Alternator | 0 W | 0 W |
| Fuel Delivery | Carbureted | Carbureted |
| Maintenance | ||
| Spark Plug | NGK B7HS | Champion L77JC4 |
| Engine Oil | TC-W3 2-Stroke | TC-W3 2-Stroke |
Technical Comparison Analysis
Power & Displacement
Comparing the Mariner 4hp International (Yamaha-built 6E0) and Evinrude 4hp Twin (2-Stroke) shows a displacement difference of 4cc. The Evinrude features a larger 87cc block, which typically provides superior low-end torque and better hole-shot performance when pushing heavy loads or reaching planning speeds.
Weight & Rigging
In terms of transom weight, the Evinrude is the lighter option at 15kg, offering a weight saving of 5kg over its competitor. This weight reduction is critical for smaller hulls or boats with limited transom capacity where every kilogram affects the center of gravity and drainage efficiency.
Electrical & Features
For boats equipped with modern electronics, sonar, and shallow-water anchors, the Evinrude offers the best charging performance with a 0W alternator. Choosing the right power-to-weight profile between these two 2-stroke engines depends heavily on your specific boat's displacement and daily power requirements.