Mariner 150hp Magnum III (2-Stroke) vs Mercury 135hp V6 OptiMax
150hp Magnum III (2-Stroke)
135hp V6 OptiMax
| Spec | Mariner 150hp Magnum III (2-Stroke) | Mercury 135hp V6 OptiMax |
|---|---|---|
| Power & Performance | ||
| Horsepower | 150 HP | 135 HP |
| Displacement | 2507 cc | 2507 cc |
| Configuration | 6 Cyl / V6 60° | 6 Cyl / V6 60° |
| Weights & Dimensions | ||
| Dry Weight | 179 kg (395 lbs) ← | 195 kg (430 lbs) |
| Mechanical & Electrical | ||
| Gear Ratio | 1.87:1 | 1.87:1 |
| Alternator | 480 W | 720 W ← |
| Fuel Delivery | Carbureted | DFI (Direct Injection) |
| Maintenance | ||
| Spark Plug | NGK BUHW | NGK IZFR5G (Iridium) |
| Engine Oil | TC-W3 (50:1) | Mercury OptiMax/DFI Oil |
Technical Comparison Analysis
Power & Displacement
Comparing the Mariner 150hp Magnum III (2-Stroke) and Mercury 135hp V6 OptiMax shows a displacement difference of 0cc. The Mercury features a larger 2507cc block, which typically provides superior low-end torque and better hole-shot performance when pushing heavy loads or reaching planning speeds.
Weight & Rigging
In terms of transom weight, the Mariner is the lighter option at 179kg, offering a weight saving of 16kg over its competitor. This weight reduction is critical for smaller hulls or boats with limited transom capacity where every kilogram affects the center of gravity and drainage efficiency.
Electrical & Features
For boats equipped with modern electronics, sonar, and shallow-water anchors, the Mercury offers the best charging performance with a 720W alternator. Choosing the right power-to-weight profile between these two 2-stroke engines depends heavily on your specific boat's displacement and daily power requirements.