Johnson 9.9hp Workhorse (2-Stroke) vs Parsun F9.8 (4-Stroke)
9.9hp Workhorse (2-Stroke)
F9.8 (4-Stroke)
| Spec | Johnson 9.9hp Workhorse (2-Stroke) | Parsun F9.8 (4-Stroke) |
|---|---|---|
| Power & Performance | ||
| Horsepower | 9.9 HP | 9.8 HP |
| Displacement | 216 cc ← | 209 cc |
| Configuration | 2 Cyl / Inline | 2 Cyl / Inline |
| Weights & Dimensions | ||
| Dry Weight | 33 kg (73 lbs) ← | 38 kg (84 lbs) |
| Mechanical & Electrical | ||
| Gear Ratio | 2.42 | 2.08 |
| Alternator | 63 W | 84 W ← |
| Fuel Delivery | Carbureted | Carbureted |
| Maintenance | ||
| Spark Plug | Champion L77JC4 | NGK DCPR6E |
| Engine Oil | TC-W3 2-Stroke | Parsun 4-Stroke Oil |
Technical Comparison Analysis
Power & Displacement
Comparing the Johnson 9.9hp Workhorse (2-Stroke) and Parsun F9.8 (4-Stroke) shows a displacement difference of 7cc. The Johnson features a larger 216cc block, which typically provides superior low-end torque and better hole-shot performance when pushing heavy loads or reaching planning speeds.
Weight & Rigging
In terms of transom weight, the Johnson is the lighter option at 33kg, offering a weight saving of 5kg over its competitor. This weight reduction is critical for smaller hulls or boats with limited transom capacity where every kilogram affects the center of gravity and drainage efficiency.
Electrical & Features
For boats equipped with modern electronics, sonar, and shallow-water anchors, the Parsun offers the best charging performance with a 84W alternator. Choosing the right power-to-weight profile between these two 2-stroke engines depends heavily on your specific boat's displacement and daily power requirements.