Johnson 6hp (4-Stroke) vs Evinrude 6hp (4-Stroke)
6hp (4-Stroke)
6hp (4-Stroke)
| Spec | Johnson 6hp (4-Stroke) | Evinrude 6hp (4-Stroke) |
|---|---|---|
| Power & Performance | ||
| Horsepower | 6 HP | 6 HP |
| Displacement | 138 cc | 138 cc |
| Configuration | 1 Cyl / Inline | 1 Cyl / Inline |
| Weights & Dimensions | ||
| Dry Weight | 25 kg (55 lbs) | 25 kg (55 lbs) |
| Mechanical & Electrical | ||
| Gear Ratio | 2.23 | 2.23 |
| Alternator | 60 W | 60 W |
| Fuel Delivery | Carbureted | Carbureted |
| Maintenance | ||
| Spark Plug | NGK CPR6EA-9 | NGK CPR6EA-9 |
| Engine Oil | 10W-30 Marine | 10W-30 Marine |
Technical Comparison Analysis
Power & Displacement
Comparing the Johnson 6hp (4-Stroke) and Evinrude 6hp (4-Stroke) shows a displacement difference of 0cc. The Evinrude features a larger 138cc block, which typically provides superior low-end torque and better hole-shot performance when pushing heavy loads or reaching planning speeds.
Weight & Rigging
In terms of transom weight, the Evinrude is the lighter option at 25kg, offering a weight saving of 0kg over its competitor. This weight reduction is critical for smaller hulls or boats with limited transom capacity where every kilogram affects the center of gravity and drainage efficiency.
Electrical & Features
For boats equipped with modern electronics, sonar, and shallow-water anchors, the Evinrude offers the best charging performance with a 60W alternator. Choosing the right power-to-weight profile between these two 4-stroke engines depends heavily on your specific boat's displacement and daily power requirements.