Johnson 25hp (2-Stroke) vs Mercury 25hp EFI (3-Cyl)
25hp (2-Stroke)
25hp EFI (3-Cyl)
| Spec | Johnson 25hp (2-Stroke) | Mercury 25hp EFI (3-Cyl) |
|---|---|---|
| Power & Performance | ||
| Horsepower | 25 HP | 25 HP |
| Displacement | 360 cc | 526 cc ← |
| Configuration | 2 Cyl / Inline | 3 Cyl / Inline |
| Weights & Dimensions | ||
| Dry Weight | 40 kg (88 lbs) ← | 78 kg (172 lbs) |
| Mechanical & Electrical | ||
| Gear Ratio | 2.15 | 1.92:1 |
| Alternator | 60 W | 210 W ← |
| Fuel Delivery | Carbureted | EFI |
| Maintenance | ||
| Spark Plug | Champion L77JC4 | NGK DCPR6E |
| Engine Oil | TC-W3 2-Stroke | 10W-30 FC-W |
Technical Comparison Analysis
Power & Displacement
Comparing the Johnson 25hp (2-Stroke) and Mercury 25hp EFI (3-Cyl) shows a displacement difference of 166cc. The Mercury features a larger 526cc block, which typically provides superior low-end torque and better hole-shot performance when pushing heavy loads or reaching planning speeds.
Weight & Rigging
In terms of transom weight, the Johnson is the lighter option at 40kg, offering a weight saving of 38kg over its competitor. This weight reduction is critical for smaller hulls or boats with limited transom capacity where every kilogram affects the center of gravity and drainage efficiency.
Electrical & Features
For boats equipped with modern electronics, sonar, and shallow-water anchors, the Mercury offers the best charging performance with a 210W alternator. Choosing the right power-to-weight profile between these two 2-stroke engines depends heavily on your specific boat's displacement and daily power requirements.