Johnson 140hp Looper V4 vs Evinrude 130hp E-TEC (G1)
140hp Looper V4
130hp E-TEC (G1)
| Spec | Johnson 140hp Looper V4 | Evinrude 130hp E-TEC (G1) |
|---|---|---|
| Power & Performance | ||
| Horsepower | 140 HP | 130 HP |
| Displacement | 2000 cc ← | 1727 cc |
| Configuration | 4 Cyl / V4 90° | 4 Cyl / V4 60° |
| Weights & Dimensions | ||
| Dry Weight | 168 kg (370 lbs) ← | 177 kg (390 lbs) |
| Mechanical & Electrical | ||
| Gear Ratio | 2.25 | 2.0 |
| Alternator | 201 W | 1915 W ← |
| Fuel Delivery | Carbureted | E-TEC Direct Injection |
| Maintenance | ||
| Spark Plug | Champion QL77JC4 | Champion QC10WEP |
| Engine Oil | VRO Injection | Evinrude XD100 / XD50 |
Technical Comparison Analysis
Power & Displacement
Comparing the Johnson 140hp Looper V4 and Evinrude 130hp E-TEC (G1) shows a displacement difference of 273cc. The Johnson features a larger 2000cc block, which typically provides superior low-end torque and better hole-shot performance when pushing heavy loads or reaching planning speeds.
Weight & Rigging
In terms of transom weight, the Johnson is the lighter option at 168kg, offering a weight saving of 9kg over its competitor. This weight reduction is critical for smaller hulls or boats with limited transom capacity where every kilogram affects the center of gravity and drainage efficiency.
Electrical & Features
For boats equipped with modern electronics, sonar, and shallow-water anchors, the Evinrude offers the best charging performance with a 1915W alternator. Choosing the right power-to-weight profile between these two 2-stroke engines depends heavily on your specific boat's displacement and daily power requirements.