Evinrude 90hp Looper V4 vs Johnson 85hp Crossflow V4
90hp Looper V4
85hp Crossflow V4
| Spec | Evinrude 90hp Looper V4 | Johnson 85hp Crossflow V4 |
|---|---|---|
| Power & Performance | ||
| Horsepower | 90 HP | 85 HP |
| Displacement | 1700 cc ← | 1500 cc |
| Configuration | 4 Cyl / V4 60° | 4 Cyl / V4 90° |
| Weights & Dimensions | ||
| Dry Weight | 143 kg (315 lbs) | 138 kg (304 lbs) ← |
| Mechanical & Electrical | ||
| Gear Ratio | 2.0 | 2.0 |
| Alternator | 201 W ← | 126 W |
| Fuel Delivery | Carbureted | Twin Carbureted |
| Maintenance | ||
| Spark Plug | Champion QL77JC4 | Champion QL77JC4 |
| Engine Oil | VRO Injection | TC-W3 2-Stroke |
Technical Comparison Analysis
Power & Displacement
Comparing the Evinrude 90hp Looper V4 and Johnson 85hp Crossflow V4 shows a displacement difference of 200cc. The Evinrude features a larger 1700cc block, which typically provides superior low-end torque and better hole-shot performance when pushing heavy loads or reaching planning speeds.
Weight & Rigging
In terms of transom weight, the Johnson is the lighter option at 138kg, offering a weight saving of 5kg over its competitor. This weight reduction is critical for smaller hulls or boats with limited transom capacity where every kilogram affects the center of gravity and drainage efficiency.
Electrical & Features
For boats equipped with modern electronics, sonar, and shallow-water anchors, the Evinrude offers the best charging performance with a 201W alternator. Choosing the right power-to-weight profile between these two 2-stroke engines depends heavily on your specific boat's displacement and daily power requirements.