Evinrude 85hp Crossflow V4 vs Mercury 80hp (Inline-4)
85hp Crossflow V4
80hp (Inline-4)
| Spec | Evinrude 85hp Crossflow V4 | Mercury 80hp (Inline-4) |
|---|---|---|
| Power & Performance | ||
| Horsepower | 85 HP | 80 HP |
| Displacement | 1500 cc ← | 1090 cc |
| Configuration | 4 Cyl / V4 90° | 4 Cyl / Inline |
| Weights & Dimensions | ||
| Dry Weight | 138 kg (304 lbs) | 95 kg (209 lbs) ← |
| Mechanical & Electrical | ||
| Gear Ratio | 2.0 | 2.07 |
| Alternator | 126 W | 201 W ← |
| Fuel Delivery | Twin Carbureted | Carbureted |
| Maintenance | ||
| Spark Plug | Champion QL77JC4 | NGK BUHW (Surface Gap) |
| Engine Oil | TC-W3 2-Stroke | TC-W3 2-Stroke |
Technical Comparison Analysis
Power & Displacement
Comparing the Evinrude 85hp Crossflow V4 and Mercury 80hp (Inline-4) shows a displacement difference of 410cc. The Evinrude features a larger 1500cc block, which typically provides superior low-end torque and better hole-shot performance when pushing heavy loads or reaching planning speeds.
Weight & Rigging
In terms of transom weight, the Mercury is the lighter option at 95kg, offering a weight saving of 43kg over its competitor. This weight reduction is critical for smaller hulls or boats with limited transom capacity where every kilogram affects the center of gravity and drainage efficiency.
Electrical & Features
For boats equipped with modern electronics, sonar, and shallow-water anchors, the Mercury offers the best charging performance with a 201W alternator. Choosing the right power-to-weight profile between these two 2-stroke engines depends heavily on your specific boat's displacement and daily power requirements.