Evinrude 60hp (2-Stroke) vs Mercury SeaPro 55hp
60hp (2-Stroke)
SeaPro 55hp
| Spec | Evinrude 60hp (2-Stroke) | Mercury SeaPro 55hp |
|---|---|---|
| Power & Performance | ||
| Horsepower | 60 HP | 55 HP |
| Displacement | 814 cc | 967 cc ← |
| Configuration | 3 Cyl / Inline | 2 Cyl / Inline-3 |
| Weights & Dimensions | ||
| Dry Weight | 95 kg (209 lbs) ← | 100 kg (221 lbs) |
| Mechanical & Electrical | ||
| Gear Ratio | 2.42 | 1.64 |
| Alternator | 84 W | 210 W ← |
| Fuel Delivery | Carbureted | EFI |
| Maintenance | ||
| Spark Plug | Champion QL77JC4 | NGK BP8H-N-10 |
| Engine Oil | TC-W3 2-Stroke | |
Technical Comparison Analysis
Power & Displacement
Comparing the Evinrude 60hp (2-Stroke) and Mercury SeaPro 55hp shows a displacement difference of 153cc. The Mercury features a larger 967cc block, which typically provides superior low-end torque and better hole-shot performance when pushing heavy loads or reaching planning speeds.
Weight & Rigging
In terms of transom weight, the Evinrude is the lighter option at 95kg, offering a weight saving of 5kg over its competitor. This weight reduction is critical for smaller hulls or boats with limited transom capacity where every kilogram affects the center of gravity and drainage efficiency.
Electrical & Features
For boats equipped with modern electronics, sonar, and shallow-water anchors, the Mercury offers the best charging performance with a 210W alternator. Choosing the right power-to-weight profile between these two 2-stroke engines depends heavily on your specific boat's displacement and daily power requirements.