Evinrude 50hp (2-Stroke) vs Mercury 45hp (Inline-4)
50hp (2-Stroke)
45hp (Inline-4)
| Spec | Evinrude 50hp (2-Stroke) | Mercury 45hp (Inline-4) |
|---|---|---|
| Power & Performance | ||
| Horsepower | 50 HP | 45 HP |
| Displacement | 737 cc ← | 720 cc |
| Configuration | 2 Cyl / Inline | 4 Cyl / Inline |
| Weights & Dimensions | ||
| Dry Weight | 84 kg (185 lbs) | 72 kg (159 lbs) ← |
| Mechanical & Electrical | ||
| Gear Ratio | 2.42 | 2.0 |
| Alternator | 144 W ← | 113 W |
| Fuel Delivery | Carbureted | Carbureted |
| Maintenance | ||
| Spark Plug | Champion QL77JC4 | NGK BUHW (Surface Gap) |
| Engine Oil | TC-W3 2-Stroke | TC-W3 2-Stroke |
Technical Comparison Analysis
Power & Displacement
Comparing the Evinrude 50hp (2-Stroke) and Mercury 45hp (Inline-4) shows a displacement difference of 17cc. The Evinrude features a larger 737cc block, which typically provides superior low-end torque and better hole-shot performance when pushing heavy loads or reaching planning speeds.
Weight & Rigging
In terms of transom weight, the Mercury is the lighter option at 72kg, offering a weight saving of 12kg over its competitor. This weight reduction is critical for smaller hulls or boats with limited transom capacity where every kilogram affects the center of gravity and drainage efficiency.
Electrical & Features
For boats equipped with modern electronics, sonar, and shallow-water anchors, the Evinrude offers the best charging performance with a 144W alternator. Choosing the right power-to-weight profile between these two 2-stroke engines depends heavily on your specific boat's displacement and daily power requirements.