Evinrude 40hp E-TEC (G1) vs Johnson 40hp (4-Stroke)
40hp E-TEC (G1)
40hp (4-Stroke)
| Spec | Evinrude 40hp E-TEC (G1) | Johnson 40hp (4-Stroke) |
|---|---|---|
| Power & Performance | ||
| Horsepower | 40 HP | 40 HP |
| Displacement | 863 cc ← | 815 cc |
| Configuration | 2 Cyl / Inline | 3 Cyl / Inline |
| Weights & Dimensions | ||
| Dry Weight | 105 kg (232 lbs) ← | 109 kg (240 lbs) |
| Mechanical & Electrical | ||
| Gear Ratio | 2.67 | 2.27:1 |
| Alternator | 1166 W ← | 216 W |
| Fuel Delivery | E-TEC Direct Injection | EFI |
| Maintenance | ||
| Spark Plug | Champion QC10WEP | NGK DCPR7E |
| Engine Oil | Evinrude XD100 / XD50 | 10W-40 FC-W |
Technical Comparison Analysis
Power & Displacement
Comparing the Evinrude 40hp E-TEC (G1) and Johnson 40hp (4-Stroke) shows a displacement difference of 48cc. The Evinrude features a larger 863cc block, which typically provides superior low-end torque and better hole-shot performance when pushing heavy loads or reaching planning speeds.
Weight & Rigging
In terms of transom weight, the Evinrude is the lighter option at 105kg, offering a weight saving of 4kg over its competitor. This weight reduction is critical for smaller hulls or boats with limited transom capacity where every kilogram affects the center of gravity and drainage efficiency.
Electrical & Features
For boats equipped with modern electronics, sonar, and shallow-water anchors, the Evinrude offers the best charging performance with a 1166W alternator. Choosing the right power-to-weight profile between these two 2-stroke engines depends heavily on your specific boat's displacement and daily power requirements.