Evinrude 4hp (2-Stroke) vs Mariner 4hp (2-Stroke)
4hp (2-Stroke)
4hp (2-Stroke)
| Spec | Evinrude 4hp (2-Stroke) | Mariner 4hp (2-Stroke) |
|---|---|---|
| Power & Performance | ||
| Horsepower | 4 HP | 4 HP |
| Displacement | 87 cc ← | 83 cc |
| Configuration | 2 Cyl / Inline | 1 Cyl / Inline |
| Weights & Dimensions | ||
| Dry Weight | 16 kg (35 lbs) ← | 20 kg (44 lbs) |
| Mechanical & Electrical | ||
| Gear Ratio | 1.00:1 | 2.0 |
| Alternator | 0 W | 0 W |
| Fuel Delivery | Carbureted | Carbureted |
| Maintenance | ||
| Spark Plug | Champion L77JC4 | NGK B7HS |
| Engine Oil | TC-W3 (50:1) | TC-W3 2-Stroke |
Technical Comparison Analysis
Power & Displacement
Comparing the Evinrude 4hp (2-Stroke) and Mariner 4hp (2-Stroke) shows a displacement difference of 4cc. The Evinrude features a larger 87cc block, which typically provides superior low-end torque and better hole-shot performance when pushing heavy loads or reaching planning speeds.
Weight & Rigging
In terms of transom weight, the Evinrude is the lighter option at 16kg, offering a weight saving of 4kg over its competitor. This weight reduction is critical for smaller hulls or boats with limited transom capacity where every kilogram affects the center of gravity and drainage efficiency.
Electrical & Features
For boats equipped with modern electronics, sonar, and shallow-water anchors, the Mariner offers the best charging performance with a 0W alternator. Choosing the right power-to-weight profile between these two 2-stroke engines depends heavily on your specific boat's displacement and daily power requirements.