Evinrude 300hp V8 Looper vs Suzuki DF300 V6
300hp V8 Looper
DF300 V6
| Spec | Evinrude 300hp V8 Looper | Suzuki DF300 V6 |
|---|---|---|
| Power & Performance | ||
| Horsepower | 300 HP | 300 HP |
| Displacement | 4000 cc | 4028 cc ← |
| Configuration | 8 Cyl / V8 90° | 6 Cyl / V6 55° |
| Weights & Dimensions | ||
| Dry Weight | 260 kg (573 lbs) | 260 kg (573 lbs) |
| Mechanical & Electrical | ||
| Gear Ratio | 1.86 | 2.08:1 |
| Alternator | 441 W | 777 W ← |
| Fuel Delivery | Carbureted | Sequential EFI |
| Maintenance | ||
| Spark Plug | Champion QL78YC | NGK BKR6E |
| Engine Oil | VRO Injection | Suzuki 10W-40 |
Technical Comparison Analysis
Power & Displacement
Comparing the Evinrude 300hp V8 Looper and Suzuki DF300 V6 shows a displacement difference of 28cc. The Suzuki features a larger 4028cc block, which typically provides superior low-end torque and better hole-shot performance when pushing heavy loads or reaching planning speeds.
Weight & Rigging
In terms of transom weight, the Suzuki is the lighter option at 260kg, offering a weight saving of 0kg over its competitor. This weight reduction is critical for smaller hulls or boats with limited transom capacity where every kilogram affects the center of gravity and drainage efficiency.
Electrical & Features
For boats equipped with modern electronics, sonar, and shallow-water anchors, the Suzuki offers the best charging performance with a 777W alternator. Choosing the right power-to-weight profile between these two 2-stroke engines depends heavily on your specific boat's displacement and daily power requirements.