Evinrude 25hp E-TEC (G1) vs Tohatsu MFS25 (Early EFI)
25hp E-TEC (G1)
MFS25 (Early EFI)
| Spec | Evinrude 25hp E-TEC (G1) | Tohatsu MFS25 (Early EFI) |
|---|---|---|
| Power & Performance | ||
| Horsepower | 25 HP | 25 HP |
| Displacement | 577 cc ← | 526 cc |
| Configuration | 2 Cyl / Inline | 3 Cyl / Inline |
| Weights & Dimensions | ||
| Dry Weight | 68 kg (150 lbs) ← | 71.5 kg (158 lbs) |
| Mechanical & Electrical | ||
| Gear Ratio | 2.15 | 1.92:1 |
| Alternator | 800 W ← | 180 W |
| Fuel Delivery | E-TEC Direct Injection | EFI |
| Maintenance | ||
| Spark Plug | Champion QC10WEP | NGK DCPR6E |
| Engine Oil | Evinrude XD100 / XD50 | Tohatsu 4-Stroke Oil |
Technical Comparison Analysis
Power & Displacement
Comparing the Evinrude 25hp E-TEC (G1) and Tohatsu MFS25 (Early EFI) shows a displacement difference of 51cc. The Evinrude features a larger 577cc block, which typically provides superior low-end torque and better hole-shot performance when pushing heavy loads or reaching planning speeds.
Weight & Rigging
In terms of transom weight, the Evinrude is the lighter option at 68kg, offering a weight saving of 3.5kg over its competitor. This weight reduction is critical for smaller hulls or boats with limited transom capacity where every kilogram affects the center of gravity and drainage efficiency.
Electrical & Features
For boats equipped with modern electronics, sonar, and shallow-water anchors, the Evinrude offers the best charging performance with a 800W alternator. Choosing the right power-to-weight profile between these two 2-stroke engines depends heavily on your specific boat's displacement and daily power requirements.