Evinrude 25hp (2-Stroke) vs Tohatsu MFS25 (Early EFI)
25hp (2-Stroke)
MFS25 (Early EFI)
| Spec | Evinrude 25hp (2-Stroke) | Tohatsu MFS25 (Early EFI) |
|---|---|---|
| Power & Performance | ||
| Horsepower | 25 HP | 25 HP |
| Displacement | 360 cc | 526 cc ← |
| Configuration | 2 Cyl / Inline | 3 Cyl / Inline |
| Weights & Dimensions | ||
| Dry Weight | 40 kg (88 lbs) ← | 71.5 kg (158 lbs) |
| Mechanical & Electrical | ||
| Gear Ratio | 2.15 | 1.92:1 |
| Alternator | 60 W | 180 W ← |
| Fuel Delivery | Carbureted | EFI |
| Maintenance | ||
| Spark Plug | Champion L77JC4 | NGK DCPR6E |
| Engine Oil | TC-W3 2-Stroke | Tohatsu 4-Stroke Oil |
Technical Comparison Analysis
Power & Displacement
Comparing the Evinrude 25hp (2-Stroke) and Tohatsu MFS25 (Early EFI) shows a displacement difference of 166cc. The Tohatsu features a larger 526cc block, which typically provides superior low-end torque and better hole-shot performance when pushing heavy loads or reaching planning speeds.
Weight & Rigging
In terms of transom weight, the Evinrude is the lighter option at 40kg, offering a weight saving of 31.5kg over its competitor. This weight reduction is critical for smaller hulls or boats with limited transom capacity where every kilogram affects the center of gravity and drainage efficiency.
Electrical & Features
For boats equipped with modern electronics, sonar, and shallow-water anchors, the Tohatsu offers the best charging performance with a 180W alternator. Choosing the right power-to-weight profile between these two 2-stroke engines depends heavily on your specific boat's displacement and daily power requirements.