Evinrude 225hp Looper V6 vs Honda BF225 V6
225hp Looper V6
BF225 V6
| Spec | Evinrude 225hp Looper V6 | Honda BF225 V6 |
|---|---|---|
| Power & Performance | ||
| Horsepower | 225 HP | 225 HP |
| Displacement | 3000 cc | 3471 cc ← |
| Configuration | 6 Cyl / V6 90° | 6 Cyl / V6 60° |
| Weights & Dimensions | ||
| Dry Weight | 204 kg (450 lbs) ← | 270 kg (595 lbs) |
| Mechanical & Electrical | ||
| Gear Ratio | 1.86 | 1.87:1 |
| Alternator | 441 W | 1296 W ← |
| Fuel Delivery | Carbureted | PGM-FI |
| Maintenance | ||
| Spark Plug | Champion QL78YC | NGK IZFR6K-11 |
| Engine Oil | VRO Injection | Honda 10W-30 |
Technical Comparison Analysis
Power & Displacement
Comparing the Evinrude 225hp Looper V6 and Honda BF225 V6 shows a displacement difference of 471cc. The Honda features a larger 3471cc block, which typically provides superior low-end torque and better hole-shot performance when pushing heavy loads or reaching planning speeds.
Weight & Rigging
In terms of transom weight, the Evinrude is the lighter option at 204kg, offering a weight saving of 66kg over its competitor. This weight reduction is critical for smaller hulls or boats with limited transom capacity where every kilogram affects the center of gravity and drainage efficiency.
Electrical & Features
For boats equipped with modern electronics, sonar, and shallow-water anchors, the Honda offers the best charging performance with a 1296W alternator. Choosing the right power-to-weight profile between these two 2-stroke engines depends heavily on your specific boat's displacement and daily power requirements.