Evinrude 225hp E-TEC G2 vs Mercury 225 OptiMax (2-Stroke)
225hp E-TEC G2
225 OptiMax (2-Stroke)
| Spec | Evinrude 225hp E-TEC G2 | Mercury 225 OptiMax (2-Stroke) |
|---|---|---|
| Power & Performance | ||
| Horsepower | 225 HP | 225 HP |
| Displacement | 3400 cc ← | 3032 cc |
| Configuration | 6 Cyl / V6 74° | 6 Cyl / V6 60° |
| Weights & Dimensions | ||
| Dry Weight | 253 kg (558 lbs) | 225 kg (496 lbs) ← |
| Mechanical & Electrical | ||
| Gear Ratio | 1.85 | 1.75:1 |
| Alternator | 1915 W ← | 756 W |
| Fuel Delivery | E-TEC Direct Injection | DFI (Direct Injection) |
| Maintenance | ||
| Spark Plug | Champion QC10WEPI | NGK IZFR6J |
| Engine Oil | Evinrude XD100 Only | OptiMax / DFI Synthetic Blend |
Technical Comparison Analysis
Power & Displacement
Comparing the Evinrude 225hp E-TEC G2 and Mercury 225 OptiMax (2-Stroke) shows a displacement difference of 368cc. The Evinrude features a larger 3400cc block, which typically provides superior low-end torque and better hole-shot performance when pushing heavy loads or reaching planning speeds.
Weight & Rigging
In terms of transom weight, the Mercury is the lighter option at 225kg, offering a weight saving of 28kg over its competitor. This weight reduction is critical for smaller hulls or boats with limited transom capacity where every kilogram affects the center of gravity and drainage efficiency.
Electrical & Features
For boats equipped with modern electronics, sonar, and shallow-water anchors, the Evinrude offers the best charging performance with a 1915W alternator. Choosing the right power-to-weight profile between these two 2-stroke engines depends heavily on your specific boat's displacement and daily power requirements.