Evinrude 200hp E-TEC G2 vs Suzuki DF200A
200hp E-TEC G2
DF200A
| Spec | Evinrude 200hp E-TEC G2 | Suzuki DF200A |
|---|---|---|
| Power & Performance | ||
| Horsepower | 200 HP | 200 HP |
| Displacement | 2700 cc | 2867 cc ← |
| Configuration | 6 Cyl / V6 66° | 4 Cyl / Inline |
| Weights & Dimensions | ||
| Dry Weight | 245 kg (540 lbs) | 226 kg (498 lbs) ← |
| Mechanical & Electrical | ||
| Gear Ratio | 2.17 | 2.50:1 |
| Alternator | 1915 W ← | 777 W |
| Fuel Delivery | E-TEC Direct Injection | Sequential EFI |
| Maintenance | ||
| Spark Plug | Champion QC10WEPI | NGK LKR6E |
| Engine Oil | Evinrude XD100 Only | Suzuki 10W-40 |
Technical Comparison Analysis
Power & Displacement
Comparing the Evinrude 200hp E-TEC G2 and Suzuki DF200A shows a displacement difference of 167cc. The Suzuki features a larger 2867cc block, which typically provides superior low-end torque and better hole-shot performance when pushing heavy loads or reaching planning speeds.
Weight & Rigging
In terms of transom weight, the Suzuki is the lighter option at 226kg, offering a weight saving of 19kg over its competitor. This weight reduction is critical for smaller hulls or boats with limited transom capacity where every kilogram affects the center of gravity and drainage efficiency.
Electrical & Features
For boats equipped with modern electronics, sonar, and shallow-water anchors, the Evinrude offers the best charging performance with a 1915W alternator. Choosing the right power-to-weight profile between these two 2-stroke engines depends heavily on your specific boat's displacement and daily power requirements.