Evinrude 175hp E-TEC G2 vs Yamaha 175hp V6 HPDI
175hp E-TEC G2
175hp V6 HPDI
| Spec | Evinrude 175hp E-TEC G2 | Yamaha 175hp V6 HPDI |
|---|---|---|
| Power & Performance | ||
| Horsepower | 175 HP | 175 HP |
| Displacement | 2700 cc ← | 2596 cc |
| Configuration | 6 Cyl / V6 66° | 6 Cyl / V6 90° |
| Weights & Dimensions | ||
| Dry Weight | 240 kg (529 lbs) | 212 kg (467 lbs) ← |
| Mechanical & Electrical | ||
| Gear Ratio | 2.17 | 1.86:1 |
| Alternator | 1915 W ← | 567 W |
| Fuel Delivery | E-TEC Direct Injection | HPDI (High Pressure Direct Injection) |
| Maintenance | ||
| Spark Plug | Champion QC10WEPI | NGK BKR7HSU (Surface Gap) |
| Engine Oil | Evinrude XD100 Only | Yamalube 2-M |
Technical Comparison Analysis
Power & Displacement
Comparing the Evinrude 175hp E-TEC G2 and Yamaha 175hp V6 HPDI shows a displacement difference of 104cc. The Evinrude features a larger 2700cc block, which typically provides superior low-end torque and better hole-shot performance when pushing heavy loads or reaching planning speeds.
Weight & Rigging
In terms of transom weight, the Yamaha is the lighter option at 212kg, offering a weight saving of 28kg over its competitor. This weight reduction is critical for smaller hulls or boats with limited transom capacity where every kilogram affects the center of gravity and drainage efficiency.
Electrical & Features
For boats equipped with modern electronics, sonar, and shallow-water anchors, the Evinrude offers the best charging performance with a 1915W alternator. Choosing the right power-to-weight profile between these two 2-stroke engines depends heavily on your specific boat's displacement and daily power requirements.