Evinrude 150hp H.O. G2 vs Mercury 135hp V6 OptiMax
150hp H.O. G2
135hp V6 OptiMax
| Spec | Evinrude 150hp H.O. G2 | Mercury 135hp V6 OptiMax |
|---|---|---|
| Power & Performance | ||
| Horsepower | 150 HP | 135 HP |
| Displacement | 2700 cc ← | 2507 cc |
| Configuration | 6 Cyl / V6 66° | 6 Cyl / V6 60° |
| Weights & Dimensions | ||
| Dry Weight | 240 kg (529 lbs) | 195 kg (430 lbs) ← |
| Mechanical & Electrical | ||
| Gear Ratio | 2.08 | 1.87:1 |
| Alternator | 1915 W ← | 720 W |
| Fuel Delivery | E-TEC Direct Injection | DFI (Direct Injection) |
| Maintenance | ||
| Spark Plug | Champion QC10WEPI | NGK IZFR5G (Iridium) |
| Engine Oil | Evinrude XD100 Only | Mercury OptiMax/DFI Oil |
Technical Comparison Analysis
Power & Displacement
Comparing the Evinrude 150hp H.O. G2 and Mercury 135hp V6 OptiMax shows a displacement difference of 193cc. The Evinrude features a larger 2700cc block, which typically provides superior low-end torque and better hole-shot performance when pushing heavy loads or reaching planning speeds.
Weight & Rigging
In terms of transom weight, the Mercury is the lighter option at 195kg, offering a weight saving of 45kg over its competitor. This weight reduction is critical for smaller hulls or boats with limited transom capacity where every kilogram affects the center of gravity and drainage efficiency.
Electrical & Features
For boats equipped with modern electronics, sonar, and shallow-water anchors, the Evinrude offers the best charging performance with a 1915W alternator. Choosing the right power-to-weight profile between these two 2-stroke engines depends heavily on your specific boat's displacement and daily power requirements.