Evinrude 140hp E-TEC G2 vs Yamaha F130 EFI
140hp E-TEC G2
F130 EFI
| Spec | Evinrude 140hp E-TEC G2 | Yamaha F130 EFI |
|---|---|---|
| Power & Performance | ||
| Horsepower | 140 HP | 130 HP |
| Displacement | 1900 cc ← | 1832 cc |
| Configuration | 3 Cyl / Inline | 4 Cyl / Inline |
| Weights & Dimensions | ||
| Dry Weight | 177 kg (390 lbs) | 172 kg (379 lbs) ← |
| Mechanical & Electrical | ||
| Gear Ratio | 2.08 | 2.15:1 |
| Alternator | 1915 W ← | 420 W |
| Fuel Delivery | E-TEC Direct Injection | EFI |
| Maintenance | ||
| Spark Plug | Champion QC10WEPI | NGK LFR6A-11 |
| Engine Oil | Evinrude XD100 Only | 10W-30 FC-W |
Technical Comparison Analysis
Power & Displacement
Comparing the Evinrude 140hp E-TEC G2 and Yamaha F130 EFI shows a displacement difference of 68cc. The Evinrude features a larger 1900cc block, which typically provides superior low-end torque and better hole-shot performance when pushing heavy loads or reaching planning speeds.
Weight & Rigging
In terms of transom weight, the Yamaha is the lighter option at 172kg, offering a weight saving of 5kg over its competitor. This weight reduction is critical for smaller hulls or boats with limited transom capacity where every kilogram affects the center of gravity and drainage efficiency.
Electrical & Features
For boats equipped with modern electronics, sonar, and shallow-water anchors, the Evinrude offers the best charging performance with a 1915W alternator. Choosing the right power-to-weight profile between these two 2-stroke engines depends heavily on your specific boat's displacement and daily power requirements.