Evinrude 140hp (4-Stroke) vs Johnson 135hp Crossflow V4
140hp (4-Stroke)
135hp Crossflow V4
| Spec | Evinrude 140hp (4-Stroke) | Johnson 135hp Crossflow V4 |
|---|---|---|
| Power & Performance | ||
| Horsepower | 140 HP | 135 HP |
| Displacement | 2044 cc ← | 1600 cc |
| Configuration | 4 Cyl / Inline | 4 Cyl / V4 90° |
| Weights & Dimensions | ||
| Dry Weight | 189 kg (417 lbs) | 142 kg (313 lbs) ← |
| Mechanical & Electrical | ||
| Gear Ratio | 2.59:1 | 1.86 |
| Alternator | 504 W ← | 126 W |
| Fuel Delivery | EFI | Twin Carbureted |
| Maintenance | ||
| Spark Plug | NGK BKR6E | Champion QL77JC4 |
| Engine Oil | 10W-30 Marine | TC-W3 2-Stroke |
Technical Comparison Analysis
Power & Displacement
Comparing the Evinrude 140hp (4-Stroke) and Johnson 135hp Crossflow V4 shows a displacement difference of 444cc. The Evinrude features a larger 2044cc block, which typically provides superior low-end torque and better hole-shot performance when pushing heavy loads or reaching planning speeds.
Weight & Rigging
In terms of transom weight, the Johnson is the lighter option at 142kg, offering a weight saving of 47kg over its competitor. This weight reduction is critical for smaller hulls or boats with limited transom capacity where every kilogram affects the center of gravity and drainage efficiency.
Electrical & Features
For boats equipped with modern electronics, sonar, and shallow-water anchors, the Evinrude offers the best charging performance with a 504W alternator. Choosing the right power-to-weight profile between these two 4-stroke engines depends heavily on your specific boat's displacement and daily power requirements.