Evinrude 110hp Crossflow V4 vs Johnson 100hp Crossflow V4
110hp Crossflow V4
100hp Crossflow V4
| Spec | Evinrude 110hp Crossflow V4 | Johnson 100hp Crossflow V4 |
|---|---|---|
| Power & Performance | ||
| Horsepower | 110 HP | 100 HP |
| Displacement | 1632 cc | 1632 cc |
| Configuration | 4 Cyl / V4 90° | 4 Cyl / V4 90° |
| Weights & Dimensions | ||
| Dry Weight | 138 kg (304 lbs) | 138 kg (304 lbs) |
| Mechanical & Electrical | ||
| Gear Ratio | 2.00:1 | 2.00:1 |
| Alternator | 126 W | 126 W |
| Fuel Delivery | Twin Carbureted | Twin Carbureted |
| Maintenance | ||
| Spark Plug | Champion QL77JC4 | Champion QL77JC4 |
| Engine Oil | TC-W3 2-Stroke | TC-W3 2-Stroke |
Technical Comparison Analysis
Power & Displacement
Comparing the Evinrude 110hp Crossflow V4 and Johnson 100hp Crossflow V4 shows a displacement difference of 0cc. The Johnson features a larger 1632cc block, which typically provides superior low-end torque and better hole-shot performance when pushing heavy loads or reaching planning speeds.
Weight & Rigging
In terms of transom weight, the Johnson is the lighter option at 138kg, offering a weight saving of 0kg over its competitor. This weight reduction is critical for smaller hulls or boats with limited transom capacity where every kilogram affects the center of gravity and drainage efficiency.
Electrical & Features
For boats equipped with modern electronics, sonar, and shallow-water anchors, the Johnson offers the best charging performance with a 126W alternator. Choosing the right power-to-weight profile between these two 2-stroke engines depends heavily on your specific boat's displacement and daily power requirements.