Evinrude 100hp Crossflow V4 vs Force 90hp (2-Stroke)
100hp Crossflow V4
90hp (2-Stroke)
| Spec | Evinrude 100hp Crossflow V4 | Force 90hp (2-Stroke) |
|---|---|---|
| Power & Performance | ||
| Horsepower | 100 HP | 90 HP |
| Displacement | 1632 cc ← | 1622 cc |
| Configuration | 4 Cyl / V4 90° | 3 Cyl / Inline |
| Weights & Dimensions | ||
| Dry Weight | 138 kg (304 lbs) | 129 kg (284 lbs) ← |
| Mechanical & Electrical | ||
| Gear Ratio | 2.00:1 | 1.93:1 |
| Alternator | 126 W | 192 W ← |
| Fuel Delivery | Twin Carbureted | Carbureted |
| Maintenance | ||
| Spark Plug | Champion QL77JC4 | Champion L76V |
| Engine Oil | TC-W3 2-Stroke | 50:1 Pre-mix |
Technical Comparison Analysis
Power & Displacement
Comparing the Evinrude 100hp Crossflow V4 and Force 90hp (2-Stroke) shows a displacement difference of 10cc. The Evinrude features a larger 1632cc block, which typically provides superior low-end torque and better hole-shot performance when pushing heavy loads or reaching planning speeds.
Weight & Rigging
In terms of transom weight, the Force is the lighter option at 129kg, offering a weight saving of 9kg over its competitor. This weight reduction is critical for smaller hulls or boats with limited transom capacity where every kilogram affects the center of gravity and drainage efficiency.
Electrical & Features
For boats equipped with modern electronics, sonar, and shallow-water anchors, the Force offers the best charging performance with a 192W alternator. Choosing the right power-to-weight profile between these two 2-stroke engines depends heavily on your specific boat's displacement and daily power requirements.